Vehicle Positioning Terminal

Product Features

1.  Tracking and positioning: The default combination conditions are reported. The combination conditions are as follows: report a current position information when moving for 10s  report a current position information when it is stationary for 120s, report current position information when the turning angle exceeds 30 degrees.

2. Ignition/deactivation report: report ignition and deactivation events, report immediately when an ignition or deactivation event occurs.

3.  Main power failure alarm: After detecting that the main power line is disconnected, report the current location information and alarm information.

4. Low voltage alarm: The main power supply voltage is detected to be low (12V the lower limit is 10.5V, 24V the lower limit is 21V), and the current position and alarm information will be reported.

5. Overspeed alarm: The platform sets the maximum speed limit value. When the GPS speed is greater than the set value, an overspeed alarm reminder will be reported.  

6. Oil circuit control: Support platform and SMS sending to cut off oil and restore oil circuit.

7. Electronic fence: support alarm when entering and leaving the fence.

8.   Trailer alarm: support acc off, the vehicle movement exceeds the set range alarm.

9. Blind area supplementary transmission: support local storage of the last 500 location records.

10. Dual positioning: report location information including base station and GPS Beidou dual-mode positioning information.

11. Remote upgrade: support remote OTA terminal software.

12. Intelligent power saving: Support to turn off the positioning module in static mode to partially hibernate and save power.

13. Over-the-air configuration: support the device and query of the parameters of the platform and SMS.

14. AC detection: Through the high trigger, the car AC air conditioner switch or other high trigger state quantities can be collected.

15. SOS trigger: The state of the door sensor or SOS button can be collected by low trigger.

16. Using scenarios based on external settings: Based on the rich external interfaces of 2500, the corresponding peripherals can be selected according to the customer's use scenarios, and the vehicle management of different industries can be realized according to the customer's business logic requirements.